| Customization: | Available |
|---|---|
| Carbon Content: | High-Carbon |
| Name: | Semi-Graphite Carbon Block |
|
Still deciding? Get samples of US$ 100/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The forming methods of graphite bricks include moulding, extrusion, vibration and isostatic pressure.
Characteristics of graphite bricks:
1.Low electric resistance,
2.Good electric and thermal conductivity,
3.High oxidation resistance,
4.Greater resistance to thermal and mechanical shock,
5.High mechanical strength,
6.High machining accuracy and so on.
Application:
1. Refractory material:
Widely used in the metallurgical industry.
2. Conducting material:
In the electronics industry, widely used for graphite electrode, brush,, etc
3. Wear-resisting material and lubricant:
Use graphite as wear-resisting and lubrication materials, can be 100m/s speed sliding in - 200 ~ 2000 °C temperature range, no or less lubricanting oil.
4. Sealing material:
It can be as sealing ring in the equipment, such as centrifugal pump, hydraulic turbine ,etc.
5. Anticorrosion material:
Widely used in petroleum, chemical, hydrometallurgy departments.
6. Protection materials:
Insulation, high temperature resistant, radiation
7. Furnace parts:
resistance heating elements, induction susceptor, structural elements and charging plates, furnace linings, heat shields and covers for pulling monocrystalline silicon or optical fibers, etc.
8. Anodes for the electrolysis of metals.
9. Parts for heat exchangers.
Blast furnace carbon block is a kind of carbon block used for laying the bottom, hearth and body of blast furnace.
The raw materials for the production of blast furnace carbon block are anthracite and metallurgical coke (sometimes adding pitch coke and graphitization metallurgical coke or graphite chips). The technological process of producing BF carbon block is the same as that of producing side carbon block and low carbon block, but the proportioning formula (particle composition and coal asphalt consumption) is different. The machining of BF carbon block is much more complicated than that of side and bottom carbon block. The carbon blocks of blast furnace are all customized in sets. When ordering, the drawings of carbon blocks of different shapes and installation drawings of each horizontal layer are attached. Because the gap of BF carbon block masonry is not more than 1mm, the machining accuracy and finish must reach a high level. After each layer of carbon block is processed separately, it needs to be pre installed in the manufacturer according to the drawings, check whether it meets the installation requirements, and then label in turn, and then pack and ship.
){kind=link}