5/8" X 17" Copper Coated Jointed Carbon Air Carbon Arc Gouging Electrode 16*430mm 50 Pieces/Box Carbon Gouging Rod

• Customization: Available
• Type: Gouging Carbon Rod
• Material: Graphite
• Model NO.: Carbon Gouging rod
• Diameter: 16mm
• Length: 430
• Welding Core Type: Artificial Graphite
• Electrode Coating Type: Copper
• Slag Characteristic: Alkaline
• Stainless Steel Welding Rod Type: Graphite
• Function: Surfacing Electrode, Stainlesss Teel Chipping
• Welding Power: DC
• Density: 1.60g.Cm3
• Len: 430mm
• Dia: 16mm
• Surface: Copper Plating
• Other Name: Welded Graphite Rod
• Application: Steel, Stone Milling, Grinding, Chipping
• Transport Package: Box, Case. Carton on Wooden Pallet
• Specification: 16*430mm
• Trademark: XS
• Origin: Hebei Province, China
• HS Code: 854519
• Production Capacity: 5000000pieces

Product Description

Product Description

 

XS CARBON supplies Copper Coated Pointed Gouging Rods        (6MM*305MM,8MM*305MM,10*305MM, 12*305MM...)
                                    DC Copper Coated Jointed Gouging Rods  ( 12*430MM, 16*430MM....)
                                    DC Copper Coated Flat Gouging Rods.        (5*5*15MM, 5*10*20MM ...430MM...)
Specifications
1) Dia: 5mm-8.5-16-19-25mm
2) Length: 300-305-355-400-455-510
3) Fixed Carbon: 98%
4) Ash< 0.9%
5) Copper Layer: 0.08-0.10mm

Arc-Air Gouging Copper Coated Carbon Electrode. The carbon electrode for carbon arc gas planning is an electrical Pole used in the carbon arc gas planning. The electrical arc can be produced between electrodes and metal objects as electrical Pole and metal objects form electrical loop. The heat produced by the electrical arc melts metal and compressed air blows away melt metal residues around the carbon electrode. The technology of using this method to cut metal or make slots on metal or remove redundant metal parts is called carbon arc gas planning.

The carbon electrode is mainly used in steel, iron, brass, hard alloy, stainless steel, and other metals to slot, plan welding lines, remove redundant metal parts, cut, make holes, fill the welding line defects, and so on.

 

Product Parameters

 

Products Specification :
 

Model	Dia * Length		Standard Current Range (A)
	mm	Inches
B503.2	3.2*305	1/8*12'	130-180
B504	4*305(355)	5/32*12'(14')	150-200
B505	5*305(355)	3/16*12'(14')	200-250
B506	6*305(355)	15/64*12'(14')	300-350
B506.5	6.5*305(355)	1/4*12'(14')	320-370
B507	7*355	9/32*14'	350-400
B508	8*305(355)(510)	5/16*12'(14')(20')	400-450
B509	9*305(355)	23/64*12'(14')	450-500
B510	10*305(355)(510)	3/8*12'(14')(20')	550-600
B511	11*305(355)(510)	7/16*12'(14')(20')	700-750
B512	12*305(355)	15/32*12'(14')	850-900
B513	13*305(355)(430)(510)	1/2*12'(14')(17')(20')	800-1000
B516	16*355(430)(510)	5/8*14(17')(20')	1000-1200
B519	19*355(430)(510)	3/4*14(17')(20')	1400-1500

CARBON ELECTRODE STARC PERFORMANCE STANDARD

Electrical resistance  ≤25μΩm
Breaking Strength  ≥22 Mpa
Bulk Density     ≥1.50g/cm3
Ash content  ≤ 0.8%
Water Conten   ≤ 0.2%
Fixed Carbon ≥ 98.5%
 

Detailed Photos

 

 

Application

 

Introduction for Use :

1. Carbon rods must be kept dry and can only be used when they are damp.

2. When used in DC power supply, the carbon rod is connected to the positive pole of the power supply and the negative pole is connected to the working.

3. The pressure of compressed air is kept at 0.5-1.6mpa

4. The arc distance between the carbon rod and the workpiece is about 3 mm, and the carbon rod exposed to the fixture is about 100 mm

5. The carbon rod and the workpiece form an included angle of 45 ° and planed along the tangent (or straight line) direction.

6. Carbon rods must be well ventilated when used. Operate according to the working current.

--------------------------------------------------------------------------------------------------------------------------------------------






Products Details Photos Show :








XINGSHI CARBON AND GRAPHITE , WELCOME YOUR INQUIRY . THEN OFFER YOU BEST !