RP HP HD Shp UHP Graphite Electrode with Nipple Various Specification and Size 80-1000mm Diameter * Length 1200-2700mm Graphite Electrodes for Eaf

• Customization: Available
• Specific Electric Resistance: 5.2-6.5
• Ash: 0.2%
• Model NO.: GE
• Size: 450×2100
• Type: Graphite Electrodes
• Carbon Content: High-Carbon
• Grade: Industrial Grade
• Crystal Morphology: Compact Crystalline Graphite
• Composition: Graphite
• Forming Way: Grinding
• Transport Package: Wooden Case/ Customized
• Specification: 100mm, 110mm, 150mm, 125mm, 200mm, 250mm, 300mm
• Trademark: XS
• Origin: Shanxi, China
• HS Code: 8545110000
• Production Capacity: 2000 Tons/Month

Product Description

XINGSHI GRAPHITE ELECTRODE Description :

Our graphite electrodes are available in different grades: UHP, SHP ,HP and RP . But ,now due to the low cost performance RP (regular power) electrodes less used in world market . We accept Customized if your budget is lower for some small secondary steel scrap factory .

UHP (Ultra high power) Graphite electrodes are used for energy-efficient transmission of high current loads into the furnace charge, giving a lower electrode consumption rate and faster metal meltdown rates.

SHP (Super high power) Graphite electrodes are recommended for use in the less demanding high power electric arc furnace and superior high power ladle furnace applications, where the application is not severe and the lower percentage of needle coke is allowable.

HP (High power)Graphite electrodes are generally used in high power ladle furnace, foundry and fused mineral applications These are usually electrodes below 350mm diameter, though in single phase applications the electrodes can be up to 500mm diameter.

RP (Regular Powder) electrodes are produced by ordinary petroleum coke , with low graphitization temperature , high electric resistance , large linear expansion coefficient  and poor thermal shock resistance . So the allowable current  density is lower ,.


HP GRAPHITE ELECTRODE
 

Items		Specific Electric Resistance <= µΩ·m	Flexural Strength >=MPa	MOE<= GPa	CTE( 100-600ºC) <= 10^-6/ºC	ASH<=	DIAMETER AND LENGTH	Bulk density >=g/cm^3	Needle Coke Content %
Standard ( YB/T 4089-2015 )	E	5.2-6.5	10.5-15	9-12	1.5-2.2	0.2	200mm-700mm 1800mm-2700mm	1.66-1.72	20-35%
	N	4.0-4.5	20-26	14-18	1.2-1.5			1.75-1.82
Factory Supply	E	<=6.5	10.5-15	9-12	1.5	0.2		>=1.66	25%-40%
	N	<=4.0	20-26	14-20	1.2			>=1.78

 

For more information on the typical properties of the different grades we supply, please see below.
 

UHP GRADE (PREMIUM) GRAPHITE ELECTRODE
Electrode Diameter	mm	300 - 710
Bulk Density	g/cm³	1.64 - 1.75
Specific resistance	µΩM	4.5 - 6.0
Flexural strength	MPa	10 - 15
CTE	10¯6/°C	0.7 - 1.5
Porosity	%	17 - 23
Ash content	%	0.1 - 0.6

For more information, typical dimensions and technical data , Welcome your Inquiry .
 

RP GRAPHITE ELECTRODES
Electrode Diameter	mm	75 - 350
Bulk Density	g/cm³	1.640 - 1.72
Specific resistance	µΩM	5.5 - 7.5
Flexural strength	MPa	8 - 13
CTE	10¯6/°C	0.9 - 2.2
Porosity	%	20 - 25
Ash content	%	0.1 - 0.6

SHP GRADE GRAPHITE ELECTRODE
Electrode Diameter	mm	250 - 600
Bulk Density	g/cm³	1.64 - 1.72
Specific resistance	µΩM	5.0 - 6.5
Flexural strength	MPa	9 - 14
CTE	10¯6/°C	0.8 - 2.0
Porosity	%	18 - 24
Ash content	%	0.1 - 0.6

Graphite electrode Diameters and Allowable Tolerance

 

DIAMETER (MM)					Length (MM)
Nominal Diameter		Actual Diameter			Nominal Length	Allowable Tolerance	Short  Length Tolerance
Inch	mm	<=	>=	Black Skin part<=	/	/	/
3	75	78	73	72	1000/1200/1400/1600	±100	-275
4	100	103	98	97	1000/1200/1400/1600
5	130	132	127	126	1000/1200/1400/1600
6	150	154	149	146	1200/1400/1600/1800
7	175	179	174	171	1200/1400/1600/1800
8	200	205	200	197	1600/1800
9	225	230	225	222	1600/1800
10	250	256	251	248	1600/1800/2000
12	300	307	302	299	1600/1800/2000/2200
14	350	358	352	349	1600/1800/2000/2200
16	400	409	403	400	1600/1800/2000/2200
18	450	460	454	451	1600/1800/2000/2200
20	500	511	505	502	1800/2000/2200/2400
22	550	562	556	553	1800/2000/2200/2400
24	600	613	607	604	2000/2200/2400/2700
26	650	663	659	656	2400/2700
28	700	714	710	707	2400/2700

Graphite Electrode Current capacity :
 

Nominal Diameter	RP Graphite Electrode		HP Graphite Electrode		UHP Graphite Electrode
mm	Allow Current Capacity /A	Current Density / (A/cm^2 )	Allow Current Capacity /A	Current Density / (A/cm^2 )	Allow Current Capacity /A	Current Density / (A/cm^2 )
75	1000-1400	22-31
100	1500-2400	19-30
130	2200-3400	17-26
150	3000-4500	16-25
200	5000-6900	15-21	5500-9000	18-25
250	7000-10000	14-20	8000-13000	18-25	8100-12200	20-30
300	10000-13000	14-18	13000-17400	17-24	15000-22000	20-30
350	13500-18000	14-18	17400-24000	17-24	20000-30000	20-30
400	18000-23500	14-18	21000-31000	16-24	25000-40000	19-30
450	22000-27000	13-17	25000-40000	15-24	32000-45000	19-30
500	25000-32000	13-16	30000-48000	15-24	38000-55000	18-27
550	28000-34000	12-14	34000-53000	14-22	45000-65000	18-27
600	30000-36000	11-13	38000-58000	13-21	50000-75000	18-26
650	32000-39000	10-12	41000-65000	12-20	60000-85000	18-25
750	34000-42000	9-11	45000-72000	12-19	70000-120000	18-30

PRODUCTS SHOWS:



Advantages :
 

• Anti-oxidation treatment for longevity.
• High-purity, high-density, strong chemical stability.
• High machining accuracy, good surface finishing.
• High mechanical strength, low electrical resistance.
• Resistant to cracking & spalling.
• High resistance to oxidation and thermal shock

More information , welcome  :

-- Furnace Type

-- Furnace Capacity

-- Electrode Diameter and Length

-- Graphite Electrode Specification and Grade ( UHP , HP ,RP OR SHP )

-- Trial Order ? Min order quantity ?

***  We guarantee that answer you within 24 hours !!!!