Isostatic Clay Graphite Crucible

• Certification: ISO
• Shape: Round
• Color: Gray
• Refractoriness: Refractoriness> 2000
• Type: Silicon carbide Crucible
• Bulk Density: 1.68g/cm3-1.85g/cm3
• Model NO.: isostatic Clay crucible
• Sample: Available
• Carbon Content: ≥38%
• Transport Package: Wooden Case
• Specification: Clay content
• Trademark: xs
• Origin: China
• HS Code: 6903100000
• Production Capacity: 50000piece

Product Description

Feature

* High temperature resistance, and the melting point is 3850±50°C, the boiling point is 4250. * Low ash content, high purity, avoiding pollution to your products. * Graphite material is easily to machine into any shapes you like. * High mechanical strength * Good sliding properties * High thermal conductivity * High thermal shock and chemical resistance * Food safety * Low wettability * High corrosion resistance and oxidation resistance * Good electrical conductivity * High density and high mechanical strength * Proper electrical conductivity

Usage

they are widely used in lightning protection, heat treatment, super-hard material, bearing, Non-ferrous metal casting, electro-spark processing, electronic semi-conductor, mechanical sealing, photovoltaics, glass and ceramic, automobile, carbon brush etc.. Our main products include electrode plate for surge protective device, graphite boat, graphite crucible, graphite bar, graphite mould, graphite crystallizer, mechanical sealing ring, graphite bearing, carbon bar, carbon plate, carbon disc, graphite connectors, graphite seal, carbon brush for all kinds of motors, lug plate spring etc.

 

Model	Density	Compression Strength	Flexural Strength	Resistance	Ash	Grain Size
	g/cm3	Mpa	Mpa	μΩm	%
	>=	>=	>=	<=	<=
72	1.62	28	14	8	0.3	1,2,4mm
72	1.72	36	18	7.5	0.3	2,0.8mm
75	1.75	48	24	7.5	0.3	325mesh
80	1.8	52	28	7.5	0.2	325mesh
85	1.85	62	36	7	0.2	325mesh

Notes of operating graphite crucibles:

1. The crucible should be stocked in the dry situation
2. Carry the crucible lightly
3. Warm the crucible in the drying machine or near the
furnace. The warming temperature should be up to 500ºC.
4. The crucible should be put under the furnace month flat.
5.When put the metal into the crucible, you should take the crucible capacity as your reference. If the crucible is too full, it will be damaged by expansion.
6.The clamps shape need as that of crucible. Avoid the
concentrate stressed destroy of the crucible.

 

7. Clean the crucible regularly and lightly.
8. The crucible should be put in the center of the furnace and leave some distance between the crucible and furnace.
9. Turn the crucible once in one week and this will help lengthen the service life.
10. The flame should not touch the crucible directly.
11.24 hours constant use will make crucibles have longer service life.
The smelt soup in the crucible should be cleared out when the furnace stop working, in order to avoid molten soup
solidificating and will be expanded when fire to reheat, and affect the service life of crucible or even burst.
12. We suggest that about 2 months for crucible melting aluminum alloy (every week for melting copper alloy), hanging out to check whether there is something wrong in the surface, and clean furnace hearth as well as turn the crucible, this operation ishelpful to prolong the service life of crucible.

Quality Control

Quality policy
The policy aims at satisfying our customer by way of initializing an updated quality management and sticking to the top requirement of "quality first" in an attempt to achieve an elite project finally.

Quality objective
Provide our customer with products in full line with relevant contract and standard by way of strictly conforming to quality control procedure and intensifying avoiding common quality faults to be sure of an effective operation of the quality assurance and quality control system, achieve a zero quality accident rate and realize good project construction quality.

Quality Assurance System and Function
Establish quality assurance and effective quality control system before construction in order to ensure the realization of construction quality objective.